Release Notes
HugeGo
HugeGo
Admin

Object Release 08/24

English 🠦 Deutsch

 

Object Release 08/24

 

Content

 

Improvements

Object Axis V1.2.21.0

DescriptionAxis Object
  • Fixed a wrong dependency in OOD file

Object Data Set Manager V1.3.12.0

DescriptionLoading and saving of a data set (DAT file) local, via Public Interface (MES / OPC UA) or OpconXml
  • Fixed compilation error of library in previous release

Object Data Set Manager V1.4.7.0

DescriptionLoading and saving of a data set (DAT file) local, via Public Interface (MES / OPC UA) or OpconXml
  • Fixed export error in previous release
  • Improved error texts

Object Data Set Manager V2.0.12.0

DescriptionLoading and saving of a data set (DAT file) local, via Public Interface (MES / OPC UA) or OpconXml
  • Fixed compilation error of library in previous release

Object Data Set Manager V3.0.2.0

DescriptionLoading and saving of a data set (DAT file) local, via Public Interface (MES / OPC UA) or OpconXml
  • Fixed compile error if ValueRange is used with a TIME variable
  • Improved error texts

Object DDL Event V2.4.17.0

DescriptionAdd-on which represents one DDL message (direct data link) for connection to Nexeed MES based on Nexeed XML specification via TCP/IP. The PDA/MDA events plcChargeChanged, plcError, plcJam(Started), plcOperationModeChanged, plcOperatorRequired(Started), plcPartsMissing(Started), plcShiftChanged and plcSystemStarted are sent automatically but must be still configured manually in OES.
  • Correct usage of OpconStrCat (introduced in V2.4.15.0) with SIZEOF(StringVar)-1 to prevent page fault exceptions

Peripheral Balluff BVS 006x V1.0.1.0

DescriptionBalluff BVS 006x Reader for Barcode, 2D Code and DMCInterfaceIP
  • Corrected the usage of OpconStrFind function

Peripheral Kuka KRC4 mxAutomation V2.1.3.0

DescriptionKuka KRC4 mxAutomationInterfaceEtherCAT
  • Ignore errors due to override warnings (KSS0470) and drives reduction (KSS03186).

Peripheral Scanner (Serial) V1.1.22.0

DescriptionUniversal scanner driver for serial scannersInterfaceSerial
  • Corrected the usage of OpconStrFind function

Peripheral Pilz PNOZmulti 2 (m ES + B0/B1 + I/O Extensions) V2.1.11.0

DescriptionPNOZmulti 2 system including m ES (EtherCAT interface), B0 or B1 (base unit) and all I/O extensions. Provides 128 input and output bits. Includes PLC library to access data from device via add-on.InterfaceEtherCAT
  • Re-compiled library without changes because two different compiled libraries with V1.0.4.0 (peripheral V2.1.8.0 or newer) were found in projects
 

New functions

Object Data Def Base V1.3.5.0

DescriptionPublicInterface/MES/data management standard data definitions
  • Added the property SelectEnumItems = true for the enum instance OpconResultType in each result structure (e.g. for display on HMI with OnlineDataViewAddon)

Object Ddl Status V1.0.5.0

DescriptionAddon which generates a view containing a list of all sent DDL events and a second view with detailed information to the selected event.
  • Do not show event table in ListView if data buffer is empty, means no DDL events configured.
  • Library update V1.0.4.0

Object InterrollMultiControlBaseV3 V3.0.4.0

DescriptionInterroll MultiControl base object
  • Add Parameter StartupDelay to InterrollBaseStateV3 Struct

Object Safety Base V2.0.13.0

DescriptionBase object for several safety objects according to Bosch/ATMO standard (see Bosch norm N54 D6 or ATMO EPLAN P8 basic diagram)
  • Enable jump out of unlock procedure when bridging enabled and rEnableUnlock valid

Object User Guidance V2.0.4.0

DescriptionStep based user guidance in the visualization. This Add-on is used to guide the user through a series of steps. Using buttons the user can acknowledge when steps are completed.
  • Only the steps that have already been completed are marked in the step preview
  • Nicht verwendete Schritte am Ende der Schrittevorschau werden ausgeblendet

Peripheral Bosch Rexroth XI8xxxxx V1.0.1.0

DescriptionSystem terminalInterfaceEtherCAT
  • XC821116 added

Peripheral Trumpf CPX V2.1.1.0

DescriptionTrumpf Laser with CPX controllerInterfaceEtherCAT
  • extend Outputs to laser from 0..15 of WORD to 0..63 of WORD
 

New objects

Peripheral Staeubli UniValPLC V4.7.0.0

DescriptionBase object for Stäubli UniValPLCInterfaceNone
  • Staubli UniValPlc Client libaray V4.7
 

HMI | Documentation | Translation

Object Interroll MultiControlV3 V3.0.8.0

DescriptionControl of up to 4 Interroll RollerDrive also from different Interroll MultiControl controls. Each motor can be started and stopped individually via commands. The status information of the MultiControl control is displayed from each connected channel. Possible sensors and actuators of the Multicontrol control are provided al BinIo at peripheral level.
  • MotorView4 was not displayed correctly
  • Delete not used DefaultView
  • Update documentation

Object ProgrammableRobot V2.2.3.0

DescriptionCommon unit for a robot
  • Updated documentation describing the use of outsourcing calculations to another task.

Object Sartorius Scale CPA/GPA/GCA/WZA/Combics V1.0.14.0

DescriptionSartorius high precision balances of model type CP (CPA, GPA and GCA), load/weighing cells of model type WZA and industrial scale of model type Combics 3 (CAW3P, CAW3S, CAH3E/G, CAS3E, CAS)
  • Measurement value in HMI shows full value received from device now (not limited to two decimal places anymore)

Object Trumpf Welding Laser V2.1.2.0

DescriptionUnit to control trumpf welding lasers
  • Deleteted unused method _checkInputSet
  • English documentation added

Peripheral Interroll MultiControlV3 V3.0.5.0

DescriptionInterroll MultiControl to control of up to 4 RollerDrive motors and 8 sensors connected to the controller.InterfaceEtherCAT
  • Update documentation
 

Maintenance

Object Data Set Manager V2.1.7.0

DescriptionLoading and saving of a data set (DAT file) local, via Public Interface (MES / OPC UA) or OpconXml
  • Improved error texts

Peripheral Balluff BNI IOL 101 V2.0.1.0

DescriptionPeripheral for Balluff IO-Link sensor/actuator hubs - 4 digital inputs. The peripheral object is only used for Beckhoff IO-Link masters, for other masters the generic I/O module must be used.InterfaceIoLink
  • Prepare for ObjectBrowser IoLink module detection

Peripheral Balluff BNI IOL 102 V2.0.1.0

DescriptionPeripheral for Balluff IO-Link sensor/actuator hubs - 8 digital inputs. The peripheral object is only used for Beckhoff IO-Link masters, for other masters the generic I/O module must be used.InterfaceIoLink
  • Prepare for ObjectBrowser IoLink module detection

Peripheral Balluff BNI IOL 302 V2.0.1.0

DescriptionPeripheral for Balluff IO-Link sensor/actuator hubs - 16 digital inputs / 16 digital outputs. The peripheral object is only used for Beckhoff IO-Link masters, for other masters the generic I/O module must be used.InterfaceIoLink
  • Prepare for ObjectBrowser IoLink module detection

Peripheral Balluff BNI IOL 309 V2.0.1.0

DescriptionPeripheral for Balluff IO-Link sensor/actuator hubs - 8 digital inputs / 8 digital outputs. The peripheral object is only used for Beckhoff IO-Link masters, for other masters the generic I/O module must be used.InterfaceIoLink
  • Prepare for ObjectBrowser IoLink module detection

Peripheral Balluff Smart Light V2.2.6.0

DescriptionBaluff Smart light peripheral, supports only single segment mode/ Support of non-Beckhoff masters as of Cp Studio 5.7 (1 Byte Out)InterfaceIoLink
  • Prepare for ObjectBrowser IoLink module detection

Peripheral Beckhoff EL3443 V2.0.3.0

Description3 channel power measurement terminal. Supported product revisions: EL3443-0000, EL3443-0010, EL3443-0011, EL3443-0013, EL3443-0020,InterfaceEtherCAT
  • Changed call of concat method

Peripheral CETA Testsysteme x15 Series V2.4.11.0

DescriptionCETA x15 measurement devices base objectInterfaceNone
  • Changed call of concat method

Peripheral Pepperl+Fuchs IQT1 V2.1.9.0

DescriptionPepperl+Fuchs RFID read/write head IQT1-18GM-IO-V1, IQT1-F61-IO-V1, IQT1-FP-IO-V1 with IO-Link/ Support of non-Beckhoff masters as of Cp Studio 5.7 (Expert Mode: 32 Byte In/32 Byte Out)InterfaceIoLink
  • Prepare for ObjectBrowser IoLink module detection

Peripheral Schmalz Kompaktejektor SCPSi V2.1.3.0

DescriptionPeripheral object for the Schmalz compact ejector SCPSi/ Support of non-Beckhoff masters as of Cp Studio 5.7 (4 Byte In/2 Byte Out)InterfaceIoLink
  • Prepare for ObjectBrowser IoLink module detection

Peripheral Schunk Pgl V2.0.2.0

DescriptionPeripheral object for PGL-Greifer (Teach function)InterfaceIoLink
  • Prepare for ObjectBrowser IoLink module detection

Peripheral Staeubli CS9uniVALplc V2.1.5.0

DescriptionStäubli CS9 - uniVAL plc - Robot control via PLCInterfaceEtherCAT
  • Support uniVAL plc V4.7.
 

ECAE Macro

Macro Beckhoff NXA-CS-C6930-0060-W10-USB-TC-CP70-L V4.0.4.0

DescriptionBeckhoff PLC System NXA-CS-C6930-0060-W10-USB-TC-CP70-LInterfaceEtherCAT
  • Article BCI.3800590268.xml updated

Macro Beckhoff NXA-CS-C6930-0060-W10-TRM-TC-CP70-L V4.0.4.0

DescriptionBeckhoff PLC Sytem NXA-CS-C6930-0060-W10-TRM-TC-CP70-LInterfaceEtherCAT
  • Article BCI.3800590269.xml updated

Macro Beckhoff EL9187_ES9187 V4.0.2.0

DescriptionPotential distribution terminal, 8 x 0 V DCInterfaceEtherCAT
  • Adjusted NED-file

Macro Beckhoff EL7221-9014 V4.0.2.0

Description1 channel Servo terminalInterfaceEtherCAT
  • Adjusted documentation type

Macro Beckhoff EL7221-0001 V4.0.2.0

Description1 channel Servo terminalInterfaceEtherCAT
  • Adjusted documentation type

Macro Beckhoff EL6695-1001 V4.0.2.0

DescriptionEtherCAT / EtherCAT CouplerInterfaceEtherCAT
  • Adjusted documentation type

Macro Beckhoff EL6695 V4.0.3.0

DescriptionEtherCAT / EtherCAT CouplerInterfaceEtherCAT
  • Adjusted documentation type

Macro Festo CTEU-EC, VAEM-L1-S16-PT [32DO] V4.0.2.0

DescriptionVTUG, 1-32 valve coilsInterfaceNone
  • Adjusted documentation type

Macro Festo CTEU-EC, CPV10-GE-PT-8 [16DO] V4.0.2.0

DescriptionCPV10, 1-16 valve coilsInterfaceNone
  • Adjusted documentation type

Macro Beckhoff C-PS-CP2716-x86-HMI-EG V4.0.2.0

DescriptionBeckhoff HMI C-PS-CP2716-x86-HMI-EGInterfaceNone
  • Adjusted NED-file

Macro Beckhoff C-PS-CP-Link-4-Extender V4.0.2.0

DescriptionBeckhoff HMI Extender C-PS-CP-Link-4-ExtenderInterfaceNone
  • Adjusted NED-file

Macro Beckhoff C-CS-CX2020-EC-USB-PLC-HMI V4.0.3.0

DescriptionBeckhoff PLC System C-CS-CX2020-EC-USB-PLC-HMIInterfaceEtherCAT
  • Adjusted PLC type
  • Adjusted NED-file

Macro Beckhoff C-CS-CX2020-EC-PLC-HMI V4.0.3.0

DescriptionBeckhoff PLC System C-CS-CX2020-EC-PLC-HMIInterfaceEtherCAT
  • Adjusted PLC type
  • Adjusted NED-file

Macro Beckhoff C-CS-C6015-EC-USB-PLC-HMI V4.0.4.0

DescriptionBeckhoff PLC System C-CS-C6015-EC-USB-PLC-HMIInterfaceEtherCAT
  • Article BCI.3800590123.xml updated

Macro Bosch NXA-CS-VPB40_4D2-W10-TRM-TC-CP90-L V4.0.2.0

DescriptionBosch NXA-CS-VPB40.4D2-W10-TRM-TC-CP90-L PLC SystemInterfaceEtherCAT
  • Adjusted NED-file

Macro Bosch NXA-CS-ctrlX-coreX7-L V4.0.2.0

DescriptionBosch PLC X7InterfaceEtherCAT
  • Adjusted documentation type
  • Adjusted NED-file

Macro Beckhoff EL3122_ES3122 V4.0.2.0

Description2 channel analog input terminal, 4..20mA, differential, 16 bitInterfaceEtherCAT
  • Adjusted documentation type

Macro Beckhoff EL3102_ES3102 V4.0.2.0

Description2 channel analog input terminal, -10V..10V, differential, 16 bitInterfaceEtherCAT
  • Adjusted NED-file

Macro Beckhoff EL2904 V4.0.2.0

Description4-channel digital output terminal, TwinSAFE, 24 V DC, 0..0.5A.InterfaceEtherCAT
  • Adjusted documentation type

Macro Beckhoff EL2889 V4.0.2.0

Description16 channel digital output terminal 24 V DC, 0.5 A ground switchingInterfaceEtherCAT
  • Adjusted documentation type

Macro Beckhoff EL2124_ES2124 V4.0.2.0

DescriptionDigital output terminal 4 channel 5V DC 20mAInterfaceEtherCAT
  • Adjusted NED-file

Macro Jenny Science Xenax Xvi 75V8/75V8S (native) V4.0.2.0

DescriptionJenny Science EtherCAT drive controller Xenax 75V8/75V8S. Supports: Positioning Mode, Velocity Mode, Torque Mode, Parameter Access, Positioning Mode (fixed Positions), QuickStopInterfaceEtherCAT
  • Adjusted documentation type

Macro Festo CTEU-EC, VMPAL-EPL-IPO32 [32DO] V4.0.2.0

DescriptionMPAL, 1-32 valve coilsInterfaceNone
  • Adjusted documentation type

Macro Beckhoff C-CS-C6015-EC-PLC-HMI V4.0.4.0

DescriptionBeckhoff PLC System C-CS-C6015-EC-PLC-HMIInterfaceEtherCAT
  • Article BCI.3800590121.xml updated

Macro Aventics VALVE_UNIT V4.0.2.0

DescriptionAventics, AV0x-4X-BUS (baseplate)InterfaceEtherCAT
  • Adjusted NED-file

Macro Aventics AES_AV03_VALVE_UNIT_4_PLACES V4.0.0.0

DescriptionAventics, AV03-4X-BUS (baseplate)InterfaceEtherCAT
  • Initial version

Macro Aventics AES_AV03_VALVE_UNIT_3_PLACES V4.0.0.0

DescriptionAventics, AV03-3X-BUS (baseplate)InterfaceEtherCAT
  • Initial version

Macro Aventics AES_AV03_VALVE_UNIT_2_PLACES V4.0.0.0

DescriptionAventics, AV03-2X-BUS (baseplate)InterfaceEtherCAT
  • Initial version

Macro Schmersal SD-I-U-EC V4.0.2.0

DescriptionEtherCAT gateway for the series-wiring of the diagnostic signals of Schmersal safety switchgear with integrated SD interfaceInterfaceEtherCAT
  • Adjusted documentation

Macro Schunk EGK Gripper V4.0.2.0

DescriptionPeripheral to control schunk EGI gripper (Firmware V4 - SFP protocol)InterfaceEtherCAT
  • Adjusted documentation type

Macro Schneider USV-TEC-Gateway V4.0.0.0

DescriptionSchneider TEC-GatewayInterfaceNone
  • Initial version

Macro Schneider C-USV-TEC2410-10 V4.0.2.0

DescriptionSchneider TEC2410-10 USVInterfaceNone
  • Adjusted documentation type

Macro Schneider USV-TEC2410 V4.0.0.0

DescriptionSchneider TEC2410 USVInterfaceNone
  • Initial version

Macro Beckhoff EL1088_ES1088 V4.0.2.0

Description8 channel digital input terminal 24 V DC, negative switchingInterfaceEtherCAT
  • Adjusted refID

Macro Beckhoff EK1100 V4.0.3.0

DescriptionEtherCAT couplerInterfaceEtherCAT
  • Adjusted documentation type

Macro Beckhoff C-PS-CP3918-HMI-GG V4.0.2.0

DescriptionBeckhoff HMI C-PS-CP3918-HMI-GGInterfaceNone
  • Adjusted NED-file

Macro Beckhoff C-PS-CP3916-HMI-GG V4.0.2.0

DescriptionBeckhoff HMI C-PS-CP3916-HMI-GGInterfaceNone
  • Adjusted NED-file

Macro Beckhoff C-PS-CP2916-HMI-EG V4.0.2.0

DescriptionBeckhoff HMi C-PS-CP2916-HMI-EGInterfaceNone
  • Adjusted NED-file

Macro Bosch C-CS-G3-VPB40_4-SSD-EC-USB-PLC-HMI V4.0.4.0

DescriptionBosch C-CS-G3-VPB40.4-SSD-EC-USB-PLC-HMIInterfaceEtherCAT
  • Article BCI.3800590078.xml updated

Macro Bosch C-CS-G3-VPB40_4-SSD-EC-PLC-HMI V4.0.4.0

DescriptionBosch C-CS-G3-VPB40.4-SSD-EC-PLC-HMI PLC SystemInterfaceEtherCAT
  • Adjusted NED-file

Macro Beckhoff NXA-CS-C6017-0010-W10-USB-TC-CP40-S V4.0.4.0

DescriptionBeckhoff PLC System NXA-CS-C6017-0010-W10-USB-TC-CP40-SInterfaceEtherCAT
  • Article BCI.3800590265.xml updated

Macro Beckhoff NXA-CS-C6017-0010-W10-TRM-TC-CP40-S V4.0.4.0

DescriptionBeckhoff PLC System NXA-CS-C6017-0010-W10-TRM-TC-CP40-SInterfaceEtherCAT
  • Article BCI.3800590264.xml updated

Macro Beckhoff EPP6228-0022 V4.0.1.0

Description8-channel communication interface, IO-Link, master, Class A, M12InterfaceEtherCAT
  • Path for article file updated
  • Path for Macro updated
  • Added documentation type
  • Added new html documentation

Macro Bosch mPad_aktiv_C-PS-mPad-86-GGmT V4.0.2.0

DescriptionBosch HMI mPad aktiv C-PS-mPad-86-GGmTInterfaceEtherNet
  • Adjusted NED-file

Macro Bosch C-PS-VEP15_6-x86-HMI-GG V4.0.2.0

DescriptionBosch HMI C-PS-VEP15.6-x86-HMI-GGInterfaceEtherNet
  • Adjusted NED-file

Macro Beckhoff ZS2020-4304 V4.0.2.0

DescriptionPower distribution boxInterfaceEtherCAT
  • Adjusted documentation

Macro Beckhoff NXA-CS-CX2033-0175-W10-USB-TC-CP50-M V4.0.3.0

DescriptionBeckhoff PLC System NXA-CS-CX2033-0175-W10-USB-TC-CP50-MInterfaceEtherCAT
  • Adjusted PLC type
  • Adjusted NED-file

Macro Beckhoff NXA-CS-CX2033-0175-W10-TRM-TC-CP50-M V4.0.3.0

DescriptionBeckhoff PLC System NXA-CS-CX2033-0175-W10-TRM-TC-CP50-MInterfaceEtherCAT
  • Adjusted PLC type
  • Adjusted NED-file

Macro Bosch C-PS-easyPanel-EG-NG V4.0.2.0

DescriptionBosch HMI C-PS-easyPanel-EG-NGInterfaceNone
  • Adjusted NED-file

Macro Bosch C-PS-easyPanel-EG-H-NG V4.0.2.0

DescriptionBosch HMI C-PS-easyPanel-EG-H-NGInterfaceNone
  • Adjusted NED-file

Macro Bosch C-CS-XM42-EC-PLC-HMI V4.0.3.0

DescriptionBosch PLC System C-CS-XM42-EC-PLC-HMIInterfaceEtherCAT
  • Article BCI.3800590138.xml updated

Macro Bosch C-CS-XM22-EC-PLC-HMI V4.0.3.0

DescriptionBosch PLC System NxEcaeEcBosC-CS-XM22-EC-PLC-HMIInterfaceEtherCAT
  • Article BCI.3800590137.xml updated

Macro Bosch C-CS-XM21-EC-PLC-HMI V4.0.3.0

DescriptionBosch PLC System C-CS-XM21-EC-PLC-HMIInterfaceEtherCAT
  • Article BCI.3800590136.xml updated

Macro Bosch NXA-PS-DR0012_1-HMI-EG-DP V4.0.2.0

DescriptionBosch HMI NXA-PS-DR0012.1-HMI-EG-DPInterfaceNone
  • Adjusted NED-file

Macro Bosch NXA-PS-DR0012_1-HMI-EG V4.0.2.0

DescriptionBosch HMI NXA-PS-DR0012.1-HMI-EGInterfaceNone
  • Adjusted NED-file

Macro Bosch C-PS-VEP15_6-x86-HMI-EG V4.0.2.0

DescriptionBosch HMI C-PS-VEP15.6-x86-HMI-EGInterfaceEtherNet
  • Adjusted NED-file

Macro Bosch C-PS-VDP15_3-HMI-GG V4.0.2.0

DescriptionBosch HMI C-PS-VDP15.3-HMI-GGInterfaceNone
  • Adjusted NED-file

Macro Bosch C-PS-VDP15_3-HMI-EG V4.0.2.0

DescriptionBosch HMI C-PS-VDP15.3-HMI-EGInterfaceNone
  • Adjusted NED-file

Macro Bosch mPad_aktiv_C-PS-mPad-x86-GGmT-S-W10 V4.0.2.0

DescriptionBosch HMI mPad aktiv C-PS-mPad-x86-GGmT-S-W10InterfaceEtherNet
  • Adjusted NED-file

Macro Bosch mPad_aktiv_C-PS-mPad-x86-GGmT-S V4.0.2.0

DescriptionBosch HMI mPad aktiv C-PS-mPad-x86-GGmT-SInterfaceEtherNet
  • Adjusted NED-file

Macro Bosch mPad_aktiv_C-PS-mPad-x86-GGmT-Cam-W10 V4.0.2.0

DescriptionBosch HMI mPad aktiv C-PS-mPad-x86-GGmT-Cam-W10InterfaceEtherNet
  • Adjusted NED-file

Macro Bosch mPad_aktiv_C-PS-mPad-x86-GGmT-Cam V4.0.2.0

DescriptionBosch HMI mPad aktiv C-PS-mPad-x86-GGmT-CamInterfaceEtherNet
  • Adjusted NED-file

Macro Bosch mPad_aktiv _C-PS-mPad-86-GGmT-W10 V4.0.2.0

DescriptionBosch HMI mPad aktiv C-PS-mPad-86-GGmT-W10InterfaceEtherNet
  • Adjusted NED-file

Macro Bosch NXA-PS-VDP40_3-HMI-EG V4.0.2.0

DescriptionBosch HMI NXA-PS-VDP40.3-HMI-EGInterfaceNone
  • Adjusted NED-file

Macro Bosch NXA-PS-easyPanel-EG-NG V4.0.2.0

DescriptionBosch HMI NXA-PS-easyPanel-EG-NGInterfaceNone
  • Adjusted NED-file

Macro Bosch NXA-CS-ctrlX-coreX3-S V4.0.3.0

DescriptionBosch PLC X3InterfaceEtherCAT
  • Adjusted documentation type
  • Adjusted NED-file

Macro Bosch mPad_passiv_C-PS-mPad-GGmT-NG2 V4.0.2.0

DescriptionBosch HMI mPad passiv C-PS-mPad-GGmT-NG2InterfaceNone
  • Adjusted NED-file

Macro Bosch mPad_passiv_C-PS-mPad-GGmT-NG V4.0.2.0

DescriptionBosch HMI mPad passiv C-PS-mPad-GGmT-NGInterfaceNone
  • Adjusted NED-file

Macro Bosch Rexroth XI211116 V4.0.2.0

Description16 channel digital output terminal 24 V DC, 0.5 AInterfaceEtherCAT
  • Adjusted documentation type

Macro Murrelektronik Impact67_DO8 V4.0.2.0

Description8 channel digital output 24 V DCInterfaceEtherCAT
  • Adjusted documentation

Macro Bosch NXA-PS-DE0021_1-HMI-GG V4.0.2.0

DescriptionBosch HMI NXA-PS-DE0021.1-HMI-GGInterfaceNone
  • Adjusted NED-file

Macro Bosch NXA-PS-DE0015_1-HMI-GG V4.0.2.0

DescriptionBosch HMI NXA-PS-DE0015.1-HMI-GGInterfaceNone
  • Adjusted NED-file

Macro Bosch NXA-CS-VPB40_4D2-W10-USB-TC-CP90-L V4.0.2.0

DescriptionBosch NXA-CS-VPB40.4D2-W10-USB-TC-CP90-L PLC SystemInterfaceEtherCAT
  • Adjusted NED-file

Macro Bosch NXA-PS-easyPanel-EG-H-NG V4.0.2.0

DescriptionBosch HMI NXA-PS-easyPanel-EG-H-NGInterfaceNone
  • Adjusted NED-file

Macro Bosch NXA-PS-DR0021_1-HMI-EG V4.0.2.0

DescriptionBosch HMI NXA-PS-DR0021.1-HMI-EGInterfaceNone
  • Adjusted NED-file

Macro Bosch NXA-PS-DR0015_1-HMI-EG V4.0.2.0

DescriptionBosch HMI NXA-PS-DR0015.1-HMI-EGInterfaceNone
  • Adjusted NED-file

Macro Bosch NXA-PS-VR3121_1-X86-HMI-W10-EG V4.0.2.0

DescriptionBosch HMI NXA-PS-VR3121.1-X86-HMI-W10-EGInterfaceNone
  • Adjusted NED-file

Macro Bosch NXA-PS-VR3115_1-X86-HMI-W10-EG V4.0.2.0

DescriptionBosch HMI NXA-PS-VR3115.1-X86-HMI-W10-EGInterfaceNone
  • Adjusted NED-file

Macro Bosch NXA-PS-VR3112_1-X86-HMI-W10-EG V4.0.2.0

DescriptionBosch HMI NXA-PS-VR3112.1-X86-HMI-W10-EGInterfaceNone
  • Adjusted NED-file

Macro Festo CTEU-EC, VAEM-L1-S8-PT [16DO] V4.0.2.0

DescriptionVTUG, 1-16 valve coilsInterfaceNone
  • Adjusted documentation type

Macro Festo CTEU-EC, VAEM-L1-S24-PT [48DO] V4.0.2.0

DescriptionVTUG, 1-48 valve coilsInterfaceNone
  • Adjusted documentation type

Macro Festo CTEU-EC, VAEM-L1-S16-PTL [32DO] V4.0.2.0

DescriptionVTUG, 1-32 valve coilsInterfaceNone
  • Adjusted documentation type

Macro Murrelektronik Impact67_EC_DO16 V4.0.2.0

Description16 channel digital output 24 V DCInterfaceEtherCAT
  • Adjusted documentation

Macro Murrelektronik Impact67_EC_DI8_DO8_2A V4.0.2.0

Description8 channel digital input / 8 channel digital output 24 V DCInterfaceEtherCAT
  • Adjusted documentation

Macro Murrelektronik Impact67_EC_DI16 V4.0.2.0

Description16 channel digital input 24 V DCInterfaceEtherCAT
  • Adjusted documentation

 

Deutsch 🠦 English

 

Object Release 08/24

 

Inhalt

 

Verbesserungen

Object Axis V1.2.21.0

BeschreibungAchsobjekt
  • Eine falsche Abhängigkeit in der OOD Datei korrigiert

Object Data Set Manager V1.3.12.0

BeschreibungLaden und Speichern eines Datensatzes (DAT Datei) lokal, über Public Interface (MES / OPC UA) oder OpconXml
  • Compiler-Fehler von Bibliothek aus dem vorherigen Release behoben

Object Data Set Manager V1.4.7.0

BeschreibungLaden und Speichern eines Datensatzes (DAT Datei) lokal, über Public Interface (MES / OPC UA) oder OpconXml
  • Export-Fehler in vorherigem Release behoben
  • Fehlertexte verbessert

Object Data Set Manager V2.0.12.0

BeschreibungLaden und Speichern eines Datensatzes (DAT Datei) lokal, über Public Interface (MES / OPC UA) oder OpconXml
  • Compiler-Fehler von Bibliothek aus dem vorherigen Release behoben

Object Data Set Manager V3.0.2.0

BeschreibungLaden und Speichern eines Datensatzes (DAT Datei) lokal, über Public Interface (MES / OPC UA) oder OpconXml
  • Compiler-Fehler behoben, wenn ValueRange mit einer TIME-Variable verwendet wird.
  • Fehlertexte verbessert

Object DDL Event V2.4.17.0

BeschreibungAdd-on, welches ein DDL-Event (Direct Data Link) zur Anbindung von Nexeed MES auf Basis der Nexeed XML Spezifikation über TCP/IP repräsentiert. Die BDE/MDE Events plcChargeChanged, plcError, plcJam(Started), plcOperationModeChanged, plcOperatorRequired(Started), plcPartsMissing(Started), plcShiftChanged und plcSystemStarted werden automatisch gesendet, müssen aber immernoch im OES selbst konfiguriert werden.
  • Korrekte Verwendung von OpconStrCat (eingeführt in V2.4.15.0) mit SIZEOF(StringVar)-1, um Page Fault Exceptions zu vermeiden.

Peripheral Balluff BVS 006x V1.0.1.0

BeschreibungBalluff BVS 006x Leser für Barcode, 2D Code and DMCSchnittstelleIP
  • Die Verwendung der OpconStrFind Funktion korrigiert

Peripheral Kuka KRC4 mxAutomation V2.1.3.0

BeschreibungKuka KRC4 mxAutomationSchnittstelleEtherCAT
  • Ignore errors due to override warnings (KSS0470) and drives reduction (KSS03186).

Peripheral Scanner (Serial) V1.1.22.0

BeschreibungUniversal-Scanner-Treiber für Serial-ScannerSchnittstelleSerial
  • Die Verwendung der OpconStrFind Funktion korrigiert

Peripheral Pilz PNOZmulti 2 (m ES + B0/B1 + I/O Extensions) V2.1.11.0

BeschreibungPNOZmulti 2 System mit m ES (EtherCAT Schnittstelle), B0 oder B1 (Basisgerät) und allen E/A Erweiterungen. Stellt 128 Eingangs- und Ausgangs-Bits zur Verfügung. Inklusive SPS-Bibliothek, um via Add-On auf alle Daten vom Gerät zuzugreifen.SchnittstelleEtherCAT
  • Bibliothek neu kompiliert ohne Änderungen, weil zwei unterschiedlich kompilierte Bibliotheken V1.0.4.0 (Peripheral V2.1.8.0 oder neuer) in Projekten gefunden wurden.
 

Neue Funktionen

Object Data Def Base V1.3.5.0

BeschreibungPublicInterface/MES/Datenmanagement Standard Datendefinitionen
  • Die Eigenschaft SelectEnumItems = true für die Enum-Instanz OpconResultType in jeder Ergebnisstruktur hinzugefügt (z.B. für Anzeige auf HMI mit OnlineDa