Release Notes
B
Bianca

Object Release 08/23

English 🠦 Deutsch

 

Content

 

 

Improvements

Object Bosch Group CcsTest V2.2.10.0

DescriptionUnit object for CcsTester with interface version V1.10.1
  • Adjustment of the layout in the export files

Object HBM ClipX Object V1.2.3.0

DescriptionClipX Measurement amplifier object
  • Adjustment of layout in Export files

Object Jenoptik Beam Expander V1.0.1.0

DescriptionBasic Object for JenOptik an motorized beam expander
  • Adjustment of vendor name

Object Jenoptik JoJenVelt V1.0.3.0

DescriptionUnit for JenVelt laser
  • Adjustment of vendor name

Object Analog Input Oversampling V1.0.2.0

DescriptionAnalog input scaling and adjustment unit with oversampling
  • Adjust layout in StartupParams.otd

Object Analog Input V1.2.19.0

DescriptionAnalog input scaling and adjustment unit
  • Adjust layout in ConfigParams.otd

Object Cg V2.1.11.0

DescriptionAddon for CG measurement. It includes an HMI, exports a step chain, provides calculation of Cg/Cgk values and can write/send result data.
  • Fixed probelm with OK variable

Object Cm V1.1.13.0

DescriptionAddon for CM measurement. It includes an HMI, exports a step chain, provides calculation of Cm/Cmk values and can write/send result data.
  • Fixed probelm with OK variable

Object CNC Portal V1.4.14.0

DescriptionCNC file (G-code) controlled multi axes system, with up to 8 axes; TwinCAT Motion (CNC) must be setup yourself (support from Beckhoff recommended); requires Nexeed Motion CNC license.
  • Adjustment of link to documentation

Object Control On V2.0.9.0

DescriptionAddon for control on according to Bosch ECAE standard (N54): automatic setting of PLC output =000+S-K911:A1 (bus runs and monitoring compressed air ok) by checking all bus masters with bus diagnostics. Additionally the addon handles the control on button input and output.
  • Adjustment of layout in StartupParams

Object DataTagAccess V1.2.12.0

DescriptionUnit for accessing all peripheral devices that provide the interface IAtmoDataTagStream
  • Adjustment of layout in Views

Object Joining Axis V1.0.3.0

DescriptionExtended axis object for realizing a joining task with an Indradrive axis amplifier
  • Adjustment of the layout of StartupParams

Object Motion Panel V1.0.2.0

DescriptionAddon to connect a motion panel
  • Adjustment of layout of the export files

Object Scanner Base V1.2.3.0

DescriptionBase definitions for scanner
  • Improvement for ctrlX

Object Stabi V2.1.7.0

DescriptionAddon for stability measurement. It includes an HMI, exports a step chain, provides calculation of stability values and can write/send result data.
  • Fixed probelm with OK variable

Object Station Lamp V2.2.4.0

DescriptionAddon for station lamp based on Bosch-Norm N54 B1
  • Adjustment of layout in the export files

Object Transfer Node Type 40 V1.1.3.0

DescriptionTransfer standard node type 40 for TS1 and TS2 systems
  • Change documentation link

Object UhfDataTagAccess V1.2.5.0

DescriptionUnit for accessing all peripheral devices that provide the interface IAtmoUhfDataTagStream
  • Add ctrlX support

Object Wpc Separation V1.2.17.0

DescriptionUnit to control and monitor a stopper/separator for work piece carriers
  • Adjustment of layout of export files

Object Plasmatreat Plasmagenerator Control V1.1.10.0

DescriptionPlasmatreat Plasmagenerator control
  • Bugfix with check Resipe in every cmd.

Peripheral Balluff BIS V-6110 V2.0.6.0

DescriptionBalluff BIS V-6110 RFID read/write device with up to 4 heads and 1 IO-Link port
  • Adjustment of layout in the export files

Peripheral Beckhoff EK1310 V2.0.1.0

Description1-port EtherCAT P extension with feed-in
  • Set ctrlX status to supported

Peripheral Beckhoff EL3443 V2.0.1.0

Description3 channel power measurement terminal. Supported product revisions: EL3443-0000, EL3443-0010, EL3443-0011, EL3443-0013, EL3443-0020,
  • Added ctrlX linkning
  • English documentation added

Peripheral Bosch Rexroth IndraDrive MPD (native/NC) V2.0.15.0

DescriptionIndraDrive dual EtherCAT drive controller MPD. Supports native: Positioning Mode, Velocity Mode, Torque Mode, Brake Function, Parameter Access, Set abs. reference, Set Stillstand window, Change Encoder (motor - external), Positioning Mode (fixed Positions), QuickStop.// Supports NC: Positioning Mode, Velocity Mode, Parameter Access, Set abs. reference, Positioning Mode (fixed Positions), QuickStop
  • Adjustment of IO Links for CXA

Peripheral Bosch Rexroth IndraDrive MPM (native/NC) V2.0.16.0

DescriptionIndraDrive dual EtherCAT drive controller MPM. Supports native: Positioning Mode, Velocity Mode, Torque Mode, Brake Function, Parameter Access, Set abs. reference, Set Stillstand window, Change Encoder (motor - external), Positioning Mode (fixed Positions), QuickStop.// Supports NC: Positioning Mode, Velocity Mode, Parameter Access, Set abs. reference, Positioning Mode (fixed Positions), QuickStop
  • Adjustment of IO Links for CXA

Peripheral Ceta x15 Series V2.4.7.0

DescriptionCETA x15 measurement devices base object
  • decode 5 decimal digits

Peripheral Keyence Xg X2xxx V1.3.9.0

DescriptionMachine vision system for keyence XG-X 2xxx devices
  • Adjustment of layout of the export files

Peripheral Kistler MaXYmos BL5867B TL5877B0 V2.0.4.0

DescriptionKistler MaXYmos BL/TL force/stroke meassuring device
  • Changes for ctrlX support

Peripheral Integrated Vision V1.1.12.0

DescriptionHDEE Vision system by Bosch ATMO with OPC UA connection
  • Adjustment of layout in the export files

Peripheral Scanner (IP) V1.2.1.0

DescriptionUniversal scanner driver for TCP/IP scanners
  • Hostname and port set as variable parameters in CPS with 'warn if empty'
  • Duplicate parameters removed
 

 

New functions

Object Pilz Pnoz Multi 2 V2.0.3.0

DescriptionAdd-on for Pilz PNOZmulti 2 (base device m B0 or m B1). Contains HMI to see diagnostic data.
  • Event class of emergency stop event can be configured
  • New OutImm outputs to check in the HMI and PLC what kind of error the PNOZmulti device reports

Peripheral Festo Press V1.1.1.0

DescriptionPeripheral for the Festo servo press kit YJKP (Firmware/Host interface: V1.4)
  • Changes for new Servo Press Kit YJKP - Host interface V1.4
 

 

Maintenance

Object Bosch Group Discrete Regulator Base V1.1.7.0

DescriptionFB for object or peripherals internal using The PLC library contains followed basic, control-related components: Continuous building Blocks: -P-/I-/D-controller-Arithmetic mean Discontinuous building Blocks: -Two-point control -Limiter
  • Plc type ctrlX support status set to yes

Object Bosch Rexroth VDP15 V1.0.2.0

DescriptionAdd-on for Rexroth industrial housing device VDP15 (order no.: C-PS-VDP15.3-HMI-GG) including IOs for buttons control on and event clear.
  • Plc type ctrlX support status set to yes

Object Burster Digiforce 9307 Base V1.1.1.0

DescriptionCommon definitions for Burster Digiforce devices
  • Change vendor name

Object Furnace Furnace Base V1.0.7.0

DescriptionBase object for induction furnaces
  • Plc type ctrlX support status set to no

Object BasMove 3 Positions V2.1.9.0

DescriptionBasMove with 3 positions (z.B. cylinder with stop/middle position)
  • Plc type ctrlX support status set to yes

Object BasMove Multi V2.1.9.0

DescriptionBasic movement with 8 input and output per movement direction, e.g. pneumatic valves/cylinders, motors with digital in-/outputs, etc.
  • Plc type ctrlX support status set to yes

Object BasMove Wait V2.1.6.0

DescriptionBasic movement with wait functionality 2 configurable inputs
  • Plc type ctrlX support status set to yes

Object Cg Base V1.2.2.0

DescriptionBase for CG measurement
  • Plc type ctrlX support status set to yes

Object Cg Probe V2.1.3.0

DescriptionProbe Addon for CG measurement.
  • Plc type ctrlX support status set to yes

Object Cm Base V1.0.3.0

DescriptionBase for CM measurement
  • Plc type ctrlX support status set to yes

Object Cm Probe V1.1.3.0

DescriptionProbe Addon for CM measurement.
  • Plc type ctrlX support status set to yes

Object Consumption electricity V1.0.1.0

DescriptionAdd-on for recording energy consumption
  • Plc type ctrlX support status set to yes

Object Fan Control V1.0.10.0

DescriptionAddon for regulating fan of control cabinet via digital output by means of Beckhoff PT100 terminals EL3201 or EL3202
  • Plc type ctrlX support status set to yes

Object File System CommonDef V1.0.3.0

DescriptionCommon definitions for file system access
  • Plc type ctrlX support status set to yes

Object Furnace V1.0.13.0

DescriptionUnit for accessing all induction furnace devices that provide the interface IAtmoFurnace
  • Set ctrlX support state to No

Object Grr Base V1.2.2.0

DescriptionBase for GRR measurement
  • Plc type ctrlX support status set to yes

Object Grr Probe V2.1.3.0

DescriptionProbe Addon for GRR measurement.
  • Plc type ctrlX support status set to yes

Object Grr V2.1.7.0

DescriptionAddon for %GRR measurement. It includes an HMI, exports a step chain, provides calculation of %GRR values and can write/send result data.
  • Plc type ctrlX support status set to yes

Object Marking Laser Base V1.1.2.0

DescriptionBase object for Marking laser
  • Plc type ctrlX support status set to yes

Object Power Distribution Base V1.1.2.0

DescriptionCommon definitions for 4-channel power distribution EP9214 and EP9224 from Beckhoff
  • Plc type ctrlX support status set to yes

Object Scanner V1.2.5.0

DescriptionUniversal scanner unit
  • Plc type ctrlX support status set to yes

Object Sensor Base V1.0.7.0

DescriptionCommon definitions for the sensor interface
  • Plc type ctrlX support status set to yes

Object Sensor V1.0.26.0

DescriptionUniversal sensor object, e.g. for encoders or length gauges with communication interface
  • Plc type ctrlX support status set to yes

Object Stabi Base V1.2.2.0

DescriptionBase for stability measurement
  • Plc type ctrlX support status set to yes

Object Stabi Probe V2.1.3.0

DescriptionProbe Addon for Stabi measurement.
  • Plc type ctrlX support status set to yes

Object Vision Com Base V2.1.9.0

DescriptionBase object for Vision communication
  • Plc type ctrlX support status set to yes

Object Pilz PnozMulti2Base V1.0.3.0

DescriptionBase object for Pilz Pnoz Multi2 B1
  • Plc type ctrlX support status set to yes

Object Schmalz Kompaktejektor SCPSi V1.0.2.0

DescriptionObject for the Schmalz compact ejector SCPSi
  • Delete unused files in Types

Object TOX Pressotechnik ElectricDrive Core V1.0.1.0

DescriptionObject for the Tox-ElectricDrive Core system
  • Added EventTexts

Object Trumpf Marking Laser V1.1.10.0

DescriptionMarking laser unit for Trumpf laser
  • Plc type ctrlX support status set to yes

Peripheral ABB IRC5 V1.4.4.0

DescriptionABB IRC5 Robot Control
  • Changes for ctrlX support, change default IP address

Peripheral Aventics AES-D-BC-ECAT (Valve System AV) V2.0.3.0

DescriptionAventics AES field bus connection with EtherCAT for Aventics valve system AV03 and AV05. Switch off monitoring (UA-OFF monitoring) is included, but requires safety valve addon (K086/K087 required according to Bosch/ATMO ECAE standard (N54)). UA-OFF monitoring requires firmware >=V1.29.
  • Plc type ctrlX support status set to yes

Peripheral Aventics LP04 V1.0.4.0

DescriptionAventics profibus valve module
  • Plc type ctrlX support status set to no

Peripheral Balluff BNI ECT-508 V2.0.3.0

Description4 or 8-channel IO-Link master
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff Ax8xxx Power module V2.0.3.0

DescriptionAx8xxx Power module
  • Set ctrlX support status of modules to not supported

Peripheral Beckhoff EAP Adapter for Network Variables V1.0.5.0

DescriptionEtherCAT Automation Protocol (EAP) Adapter for network variables
  • Set supported state to ctrlX unsupported

Peripheral Beckhoff EAP EL6601 Adapter for Network Variables V1.0.4.0

DescriptionEtherCAT Automation Protocol (EAP) Adapter for network variables via EL6601
  • Set supported state to ctrlX unsupported

Peripheral Beckhoff EK1100 V2.0.6.0

DescriptionEtherCAT coupler
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff EL1018 V2.0.6.0

Description8 channel digital input terminal 24 V DC
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff EL1904 V2.0.5.0

Description4-channel digital input terminal, TwinSAFE, 24 V DC. This object has no content!
  • Set ctrlX support state of modules to not supported

Peripheral Beckhoff EL2008 V2.0.7.0

Description8 channel digital output terminal 24 V DC, 0.5 A
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff EL2904 V2.0.6.0

Description4-channel digital output terminal, TwinSAFE, 24 V DC, 0..0.5A. This object has no content!
  • Set ctrlX support state of modules to not supported

Peripheral Beckhoff EL3024 V2.1.2.0

Description4 channel analog input terminal, 4..20 mA, differential, 12 bit
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff EL3054 V2.1.4.0

Description4 channel analog input terminal, 4..20mA, 12 Bit single ended
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff EL3062 V2.1.3.0

Description2-channel analog input terminals 0…30 V, single-ended, 12 bit
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff EL3201 V2.1.4.0

Description1-channel input terminal PT100 (RTD), 2-3-4 wire connection
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff EL3314 high precision V2.1.2.0

Description4-channel thermocouple input terminals with open-circuit recognition / 32-Bit value
  • Added documentation

Peripheral Beckhoff EL4102 V2.1.3.0

Description2 channel analog output terminal 0-10V,16 bit
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff EL5032 V2.1.5.0

Description2-channel EnDat encoder interface
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff EL6001 V2.0.7.0

DescriptionEL6001 - 1 channel serial terminal
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff EL6601 V2.0.6.0

DescriptionEL6601 - 1 channel Ethernet port switch
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff EL6731-0010 V1.0.3.0

DescriptionPROFIBUS-Slave
  • Plc type ctrlX support status set to no

Peripheral Beckhoff ELX3152 V2.0.2.0

Description2-channel analog input terminal 4…20 mA, single-ended, 16 bit
  • Set ctrlX support state of TSC Module to No

Peripheral Beckhoff ELX3314 V2.0.3.0

Description4-channel thermocouple input terminals with open-circuit recognition
  • Set ctrlX support state to No

Peripheral Beckhoff EP1018 V2.0.5.0

Description8 channel digital input 24 V DC
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff EP1122 V2.0.7.0

Description2 port EtherCAT junction
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff EP1957 (TwinSAFE) V2.0.2.0

Description8-channel digital input + 4-channel digital output terminal, TwinSAFE, 24 V DC. This object has no content!
  • Plc type ctrlX support status set to no

Peripheral Beckhoff EP2008 V2.0.6.0

Description8 channel digital output terminal 24 V DC, 0.5 A
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff EP2028 V2.0.6.0

Description8 channel digital output terminal 24 V DC, 2 A
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff EP2038 V2.0.5.0

Description8-channel digital output 24 V DC, IMAX = 2 A (∑ 4 A), with diagnostics
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff EP2338 V2.0.4.0

Description8 x digital input + 8 x digital output 24 V
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff EP2816 V2.0.7.0

Description16 channel digital output terminal 24 V DC, 0.5 A
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff EP3174 V2.1.5.0

Description4 channel analog input terminal, -10..10V,0..20mA configurable
  • Plc type ctrlX support status of modules set to no

Peripheral Beckhoff EP4374 V2.1.3.0

Description2 channel analog input, 2 channel analog output terminal, configurable range
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff EP9214-0023 V2.1.5.0

DescriptionPower distribution for EtherCAT Box Modules
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff Ex600x V2.0.13.0

DescriptionLibrary for Beckhoff special terminals Ex600x
  • Plc type ctrlX support status set to yes

Peripheral Beckhoff Generic NOV-DP-RAM V1.0.4.0

DescriptionPeripheral for Beckhoff Generic NOV-DP-RAM.
  • Set supported state to ctrlX unsupported

Peripheral Beckhoff Publisher V1.0.4.0

DescriptionEtherCAT Automation Protocol (EAP) Network Variables Publisher
  • Set supported state to ctrlX unsupported

Peripheral Beckhoff Subscriber V1.0.4.0

DescriptionEtherCAT Automation Protocol (EAP) Network Variables Subscriber
  • Set ctrlX support state to No

Peripheral Beckhoff USB Interface V1.0.3.0

DescriptionPeripheral for virtual USB interface.InterfaceUSB
  • Set ctrlX support state to not supported

Peripheral Bosch Rexroth AES-D-BC-ECAT (Valve System AV) V2.0.20.0

DescriptionAventics AES field bus connection with EtherCAT for Aventics valve system AV03 and AV05. Switch off monitoring (UA-OFF monitoring) is included, but requires safety valve addon (K086/K087 required according to Bosch/ATMO ECAE standard (N54)). UA-OFF monitoring requires firmware >=V1.29.
  • Plc type ctrlX support status set to yes

Peripheral Bosch Rexroth 106_en40 V1.0.6.0

DescriptionIdentification system ID40
  • Plc type ctrlX support status set to no

Peripheral Bosch Rexroth IndraDrive Controller V2.2.23.0

DescriptionBase for all IndraDrive controllers
  • Removed unused file in config files folder
  • Added SMM 1-16 Special mode for interpreting the DriveReadyForMovement signal

Peripheral Bosch Rexroth IndraDrive MPC (native/NC) V2.0.17.0

DescriptionIndraDrive EtherCAT drive controller MPC. Currently supported configuration: 1 CCD Master + 7 CCD Slaves. Supports native: Positioning Mode, Velocity Mode, Torque Mode, Brake Function, Parameter Access, Set abs. reference, Set Stillstand window, Change Encoder (motor - external), Positioning Mode (fixed Positions), QuickStop.// Supports NC: Positioning Mode, Velocity Mode, Parameter Access, Set abs. reference, Positioning Mode (fixed Positions), QuickStop
  • Plc type ctrlX support status set to yes

Peripheral Bosch Rexroth IO-BOX32-DP V1.0.3.0

DescriptionPeripheral input/output device with IP65 for Profibus-DP and CANopen with 32 configurable inputs/outputs
  • Plc type ctrlX support status set to no

Peripheral Bosch Rexroth S20-EC-BK V2.0.6.0

DescriptionS20 IO System Ethercat Coupler
  • Set CXA and BTC support status to Yes

Peripheral Bosch Rexroth XI1xxx04 V1.0.1.0

Description4 channel digital input terminal 24 V DC, 3 ms
  • Changes for ctrlX support

Peripheral Bosch Rexroth XI2xxx04 V1.0.1.0

Description4 channel digital output terminal 24 V DC, 0.5 A
  • Changes for ctrlX support

Peripheral Eldec Xfg V1.1.8.0

DescriptionFrequency generator from Eldec (HFG, MFG, DFG) for heating with induction heat
  • Plc type ctrlX support status set to no

Peripheral Esd electronics CAN Gateway V2.0.6.0

DescriptionESD CAN Gateway
  • Plc type ctrlX support status set to no

Peripheral Feig Electronic Feig UHF Reader 4 Channel V1.0.5.0

DescriptionFeig UHF Reader 4 antenna
  • Remove Enumerations

Peripheral Feig Electronic Feig UHF Reader Single V1.0.7.0

DescriptionFeig UHF Reader Single
  • Delete unused enum file

Peripheral Herrmann Vario (Profibus) V2.0.6.0

DescriptionHerrmann Vario ultrasonic welding control
  • Plc type ctrlX support status set to no

Peripheral Himmelwerk AED V2.0.5.0

DescriptionHimmelwerk AED (display unit digital) for spectral pyrometer
  • Plc type ctrlX support status set to no

Peripheral Inficon LX 3000 (LD-protocol (Serial)) V1.0.2.0

DescriptionInfinicon leak detector XL3000 with the LD protocol
  • Delete unused files

Peripheral JW Froehlich Mxx V2.1.4.0

DescriptionStandard Massflow Leak Test Mxx
  • Plc type ctrlX support status set to no

Peripheral Keba CB410 Robot Keyboard V1.0.4.0

DescriptionPeripheral for Keba connection box CB410. Includes the fast response keys and key labels for the robot keyboard layout
  • Changed link to english documentation

Peripheral Keyence SR 2000 V1.0.6.0

DescriptionScanner driver for Keyence SR750, SR1000 and SR2000 scanners
  • Plc type ctrlX support status set to yes

Peripheral Matuschek Messtechnik H9000 WeldingControl V2.1.2.0

DescriptionSpatz H9000 WeldingControl for Profibus
  • Plc type ctrlX support status set to no

Peripheral Ex5xxx V2.1.12.0

DescriptionLibrary for Beckhoff counter terminals Ex5xxx
  • Plc type ctrlX support status set to yes

Peripheral IO Keyboard Manager Base V1.0.2.0

DescriptionBase peripheral to provide IO-data to the Keyboard manager addon
  • Plc type ctrlX support status set to yes

Peripheral Io Link Base V2.0.2.0

DescriptionBase object for I/O-Link devices
  • Plc type ctrlX support status set to yes

Peripheral Scanner (Serial) V1.1.20.0

DescriptionUniversal scanner driver for serial scanners
  • New base version adden

Peripheral Simulation Analog Input V1.0.8.0

DescriptionAnalog input for simulated hardware
  • Plc type ctrlX support status set to yes

Peripheral Simulation Analog Output V1.0.8.0

DescriptionAnalog output for simulated hardware
  • Plc type ctrlX support status set to yes

Peripheral Simulation Basic Move V1.0.8.0

DescriptionUniversal peripheral for simulated basic movements
  • Plc type ctrlX support status set to yes

Peripheral Simulation Basic Move Wait V1.0.3.0

DescriptionUniversal peripheral for simulated basic movements
  • Plc type ctrlX support status set to yes

Peripheral Simulation Consumption V1.0.5.0

DescriptionConsumption for simulated hardware
  • Plc type ctrlX support status set to yes

Peripheral Simulation Data Tag V1.0.7.0

DescriptionUniversal peripheral for simulated data tag readers
  • Plc type ctrlX support status set to yes

Peripheral Simulation Drive V1.2.10.0

DescriptionSimulation peripheral drive
  • Plc type ctrlX support status set to yes

Peripheral Simulation N54 Safety V1.0.12.0

DescriptionSimulator of the digital IO safety circuit of Bosch norm N54 D6. It may not be used on real machinery or equipment, only for offline testing or training.
  • Plc type ctrlX support status set to yes

Peripheral Simulation Scanner V1.0.10.0

DescriptionUniversal scanner driver for simulated scanners
  • Plc type ctrlX support status set to yes

Peripheral Simulation Sensor V1.0.6.0

DescriptionSimulation Sensor
  • Plc type ctrlX support status set to yes

Peripheral Simulation Vision V1.0.8.0

DescriptionSimulation Vision with OPC UA connection
  • Plc type ctrlX support status set to yes

Peripheral Pilz PNOZmulti 2 (m ES + B0/B1 + I/O Extensions) V2.1.9.0

DescriptionPNOZmulti 2 system including m ES (EtherCAT interface), B0 or B1 (base unit) and all I/O extensions. Provides 128 input and output bits. Includes PLC library to access data from device via add-on.
  • Plc type ctrlX support status set to yes

Peripheral Schmersal SD-I-U-EC V2.0.10.0

DescriptionEtherCAT gateway for the series-wiring of the diagnostic signals of Schmersal safety switchgear with integrated SD interface
  • Plc type ctrlX support status set to yes

Peripheral Siemens MASS6000 V2.0.12.0

DescriptionMass flow measurement device for Profibus-DP
  • Plc type ctrlX support status set to no

Peripheral Trumpf TruMark V1.1.12.0

DescriptionTrumpf Marking Laser with EtharCat
  • Plc type ctrlX support status set to yes

Peripheral Weiss NCxxxTBx V1.0.8.0

DescriptionWeiss rotary tables of model series NCxxxTBx with B+R control and absolute encoder
  • Plc type ctrlX support status set to no

Peripheral WIKA D-1x V1.0.4.0

DescriptionPressure transmitter model 'D-10-7' and 'D-11-7' from WIKA
  • Plc type ctrlX support status set to no

Peripheral Wittenstein Simco Verstärker Basis V2.0.9.0

DescriptionWittenstein controller base OOD
  • Plc type ctrlX support status of modules set to no
 

 

New objects

Object System Health V1.0.0.0

DescriptionAddon for System health check (e.g. monitoring of hard disk usage, utilization of the RAM, cycle time overruns)
  • Initial release version

Peripheral Euchner MSC V2.0.0.0

DescriptionEtherCat Gateway for Euchner MSC safety controller
  • Initial release version

Peripheral PulseRoller Linx-Ai Controller V1.0.0.0

DescriptionBase for all MotionLinx controllers
  • Initial release version
 

 

HMI | Documentation | Translation

Macro Beckhoff EL2004_ES2004 V4.0.0.0

DescriptionDigital output terminal
  • Initial version

Macro Bosch Rexroth BDC V4.0.1.0

DescriptionDirect field bus connection (BDC, B design) for 32 channel valve terminal of HF series. Only for old projects. Use AV series with AES bus coupler in new projects.
  • Function template created in the part data

Object Ceta Ceta Flow Test V2.4.3.0

DescriptionObject for CETATEST flow tester. Supported test modes: volumetric flow, mass flow . Supported options: endless measuring, nominal pressure optimization. Unsupported options/functions: exponential extrapolation, control valves, set/read measurement curve file name, program series, test repetition (but of course you can start any command again as often as you want).
  • Enumeration CetaMeasUnit added comment for enum element 7

Object Ceta Ceta Leakage Test V2.4.4.0

DescriptionObject for CETATEST leakage testers. Supported test modes: pressure rise, pressure decay. Supported options: temperature compensation (only pressure decay), prefill/prevent
  • Enumeration CetaMeasUnit added comment for enum element 7

Object Keyence TM x5000 V1.0.1.0

DescriptionObject for the TM-X5000 Series 2D Inline Light Band Micrometer
  • English documentation added

Object Robot V2.0.3.0

DescriptionUniversal unit for robots
  • Fixed a bug that the hmi controls for Acceleration / Deceleration was not completely hidden, when not support by the robot

Object State V1.1.7.0

DescriptionAccessible state tile displaying control on, fieldbus, safety doors, MES connection, home position, station empty. Additionally a state structure is provided in the PLC that collects many information at central location.
  • Czech translation added

 

Deutsch 🠦 English

 

Inhalt

NEXEED AUTOMATION OBJECT RELEASE
1