Release Notes
B
Bianca

Object Release 07/23

English 🠦 Deutsch

 

Content

 

 

Improvements

Object Bosch Group CcsTest V2.2.9.0

DescriptionUnit object for CcsTester with interface version V1.10.1
  • Adjustment of references and pointer in the export

Object Bosch Group EhpUniversalCommInterface V1.1.16.0

DescriptionUnit object for universal comm interface of EhP
  • Adjustment of references and pointer in the export

Object Bosch Group MC_C166 Pute V1.0.11.0

DescriptionMC C166 Pute unit
  • Adjustment of references and pointer in the export

Object Bosch Group Pute V1.1.5.0

DescriptionPUTE unit
  • Adjustment of references and pointer in the export

Object Burster Digiforce 9307 V1.1.1.0

DescriptionDigiforce 9307
  • Adjustment of references and pointer in the export

Object Captron electronic OGL V1.2.8.0

DescriptionObjekt to do measuring of position deviation and diameter for example of a dispensing needle. A calibration part is needed.
  • Adjustment of references and pointer in the export

Object Fibro Rotary table with IO interface V1.2.1.0

DescriptionFibro rotary table with IO interface
  • Set ctrlX support state to NotTested
  • Replace standard placeholder in library

Object HBM ClipX Object V1.2.2.0

DescriptionClipX Measurement amplifier object
  • Adjustment of references and pointer in the export

Object Axis V1.2.18.0

DescriptionAxis Object
  • Adjustment of references and pointer in the export

Object Cg V2.1.9.0

DescriptionAddon for CG measurement. It includes an HMI, exports a step chain, provides calculation of Cg/Cgk values and can write/send result data.
  • Problems with the dialog OK of the HMI elements and the upper limit for the probes in the graph view have been fixed

Object Cm V1.1.11.0

DescriptionAddon for CM measurement. It includes an HMI, exports a step chain, provides calculation of Cm/Cmk values and can write/send result data.
  • Problems with the upper limit for the probes in the graph view have been fixed

Object Fan Control V1.0.9.0

DescriptionAddon for regulating fan of control cabinet via digital output by means of Beckhoff PT100 terminals EL3201 or EL3202
  • Adjustment of references and pointer in the export

Object FlexPress V1.0.15.0

DescriptionFlexPress unit
  • Adjustment of references and pointer in the export

Object Grr V2.1.6.0

DescriptionAddon for %GRR measurement. It includes an HMI, exports a step chain, provides calculation of %GRR values and can write/send result data.
  • Problems with the upper limit for the probes in the graph view have been fixed

Object Rotary Table Open Loop V2.3.2.0

DescriptionRotary tables with table drive in Open Loop Mode
  • Adjustment of references and pointer in the export

Object Sensor V1.0.25.0

DescriptionUniversal sensor object, e.g. for encoders or length gauges with communication interface
  • Adjustment of references and pointer in the export

Object Stabi V2.1.5.0

DescriptionAddon for stability measurement. It includes an HMI, exports a step chain, provides calculation of stability values and can write/send result data.
  • Problems with the dialog OK of the HMI elements and the upper limit for the probes in the graph view have been fixed

Object Time Client V1.0.3.0

DescriptionAdd-on which performs a cyclic time synchronization with a time server. The time server is an additional software which needs to be installed on the computer which should deliver the time. This addon does synchronize with a accuracy of 1 second and allows to configure the interval in which a synchronization with the server should take place.
  • Adjustment of references and pointer in the export

Object Vmdt V1.0.7.0

DescriptionVmdt Message
  • Adjustment of references and pointer in the export

Peripheral Asentics Videolab V1.0.8.0

DescriptionAsentics videolab systems connected via Ethernet (TCP/IP)InterfaceIP
  • Adjustment of references and pointer in the export

Peripheral Balluff BIS V-6110 V2.0.5.0

DescriptionBalluff BIS V-6110 RFID read/write device with up to 4 heads and 1 IO-Link portInterfaceEtherCAT
  • Adjustment of references and pointer in the export
  • Fix issues with export in ctrlX

Peripheral Balluff BNI ECT-508 V2.0.2.0

Description4 or 8-channel IO-Link masterInterfaceEtherCAT
  • Adjustment of references and pointer in the export

Peripheral Balluff Smart Light V2.2.4.0

DescriptionBaluff Smart light peripheral, supports only single segment mode/ Support of non-Beckhoff masters as of Cp Studio 5.7 (1 Byte Out)InterfaceIoLink
  • Adjustment of references and pointer in the export
  • Fixed probelm with UseAs, added UseAs for each FB (IODD/non IODD). Conditional linking removed.

Peripheral Beckhoff Beckhoff IO Exxxxx V1.0.1.0

DescriptionObject for installing the EtherCAT description files of the Beckhoff terminalsInterfaceEtherCAT
  • Object name in the OOD changed

Peripheral Beckhoff EL1918 (TwinSAFE) V2.1.3.0

Description8-channel digital input terminal, TwinSAFE, 24 V DC. This object has no content!InterfaceEtherCAT
  • Added BaseRefIds to modules to fix clean up issue with ObjectBrowser

Peripheral Beckhoff EL6692 V2.0.7.0

DescriptionEtherCAT / EtherCAT CouplerInterfaceEtherCAT
  • Adjustment of references and pointer in the export

Peripheral Beckhoff EL6695 V2.0.7.0

DescriptionEtherCAT / EtherCAT CouplerInterfaceEtherCAT
  • Adjustment of references and pointer in the export

Peripheral Beckhoff Ex6228 Base V2.2.3.0

DescriptionEx6228 - 8-channel IO-Link masterInterfaceNone
  • Adjustment of references and pointer in the export

Peripheral Beckhoff Twinsafe Logic (0 Slaves) V1.0.0001.0

DescriptionTwinSAFE logicInterfaceEtherCAT
  • Reordert structure for cleanup of ObjectBrowser

Peripheral Beckhoff Twinsafe Logic (100 Slaves) V1.0.100001.0

DescriptionTwinSAFE logicInterfaceEtherCAT
  • Reordert structure for cleanup of ObjectBrowser

Peripheral Beckhoff Twinsafe Logic (25 Slaves) V1.0.025001.0

DescriptionTwinSAFE logicInterfaceEtherCAT
  • Reordert structure for cleanup of ObjectBrowser

Peripheral Beckhoff Twinsafe Logic (50 Slaves) V1.0.050001.0

DescriptionTwinSAFE logicInterfaceEtherCAT
  • Reordert structure for cleanup of ObjectBrowser

Peripheral Beckhoff Twinsafe Logic (75 Slaves) V1.0.075001.0

DescriptionTwinSAFE logicInterfaceEtherCAT
  • Reordert structure for cleanup of ObjectBrowser

Peripheral Bosch Group Ccs Tester V1.1.5.0

DescriptionCcs TestInterfaceIP
  • Adjustment of references and pointer in the export

Peripheral Bosch Rexroth ctrlX drive (native) V2.0.9.0

DescriptionctrlX drive EtherCAT drive controller. Communication directly via the EtherCAT bus (native). Supports in closed loop mode: Positioning mode, Velocity mode, Torque mode, Brake function, Parameter access, Set absolute reference, Set stand still window, Change encoder (motor - external), Positioning mode (fixed positions), QuickStopInterfaceEtherCAT
  • Adjustment of references and pointer in the export

Peripheral Bosch Rexroth ctrlX drive (NC) V2.0.2.0

DescriptionctrlX EtherCAT drive controller. Supports: Positioning Mode, Velocity Mode, Parameter Access, Set abs. reference, Positioning Mode (fixed Positions), QuickStopInterfaceEtherCAT
  • Adjustment of references and pointer in the export

Peripheral Bosch Rexroth IndraDrive MPB (native) V2.0.23.0

DescriptionIndraDrive EtherCAT drive controller MPB (Advanced). Supports: Positioning Mode, Velocity Mode, Torque Mode, Brake Function, Parameter Access, Set abs. reference, Set Stillstand window, Change Encoder (motor - external), Positioning Mode (fixed Positions), QuickStopInterfaceEtherCAT
  • Adjustment of references and pointer in the export

Peripheral Bosch Rexroth IndraDrive MPC (native/NC) V2.0.16.0

DescriptionIndraDrive EtherCAT drive controller MPC. Currently supported configuration: 1 CCD Master + 7 CCD Slaves. Supports native: Positioning Mode, Velocity Mode, Torque Mode, Brake Function, Parameter Access, Set abs. reference, Set Stillstand window, Change Encoder (motor - external), Positioning Mode (fixed Positions), QuickStop.// Supports NC: Positioning Mode, Velocity Mode, Parameter Access, Set abs. reference, Positioning Mode (fixed Positions), QuickStopInterfaceEtherCAT
  • Adjustment of references and pointer in the export

Peripheral Bosch Rexroth IndraDrive MPD (native/NC) V2.0.14.0

DescriptionIndraDrive dual EtherCAT drive controller MPD. Supports native: Positioning Mode, Velocity Mode, Torque Mode, Brake Function, Parameter Access, Set abs. reference, Set Stillstand window, Change Encoder (motor - external), Positioning Mode (fixed Positions), QuickStop.// Supports NC: Positioning Mode, Velocity Mode, Parameter Access, Set abs. reference, Positioning Mode (fixed Positions), QuickStopInterfaceEtherCAT
  • Adjustment of references and pointer in the export

Peripheral Bosch Rexroth IndraDrive MPH (native) V2.0.16.0

DescriptionIndraDrive EtherCAT drive controller MPH (Advanced). Supports: Positioning Mode, Velocity Mode, Torque Mode, Brake Function, Parameter Access, Set abs. reference, Set Stillstand window, Change Encoder (motor - external), Positioning Mode (fixed Positions), QuickStopInterfaceEtherCAT
  • Adjustment of references and pointer in the export

Peripheral Bosch Rexroth IndraDrive MPM (native/NC) V2.0.15.0

DescriptionIndraDrive dual EtherCAT drive controller MPM. Supports native: Positioning Mode, Velocity Mode, Torque Mode, Brake Function, Parameter Access, Set abs. reference, Set Stillstand window, Change Encoder (motor - external), Positioning Mode (fixed Positions), QuickStop.// Supports NC: Positioning Mode, Velocity Mode, Parameter Access, Set abs. reference, Positioning Mode (fixed Positions), QuickStopInterfaceEtherCAT
  • Adjustment of references and pointer in the export

Peripheral Bosch Rexroth PSI6xxx V1.2.1.0

DescriptionRexroth medium-frequency resistance welding controller series PSI6000InterfaceProfibus
  • Adjustment of references and pointer in the export

Peripheral Bosch Rexroth Sytronix 7020 V2.0.2.0

DescriptionIndraDrive EtherCAT drive controller with Sytronix 7020 (pQ-Control)InterfaceEtherCAT
  • Adjustment of references and pointer in the export

Peripheral Bosch Rexroth Xfc frequency converter V2.1.3.0

DescriptionBase for all xFC frequency converterInterfaceEtherCAT
  • Fixed probelm with no shown error if error can not be cleared during init
  • Info added in error text description

Peripheral Cab Printer V1.2.8.0

DescriptionPeripheral driver for 'CAB+ Printer' type devices connected over ethernet (TCP/IP)InterfaceIP
  • open socket on error clear
  • Improved sendRecv methode

Peripheral DiSoric x-RGB V2.1.3.0

DescriptionPeripheral for DiSoric X-RGBInterfaceIoLink
  • Adjustment of references and pointer in the export
  • Fixed probelm with UseAs, added UseAs for each FB (IODD/non IODD). Conditional linking removed.

Peripheral EhP IpEhpUniversalCommInterface V1.1.5.0

DescriptionEhP communication interfaceInterfaceIP
  • Adjustment of references and pointer in the export

Peripheral Epson RC700A V2.0.1.0

DescriptionEpson RC700 - robot controlInterfaceEtherCAT
  • Adjustment of references and pointer in the export

Peripheral Feig Electronic Feig UHF Reader 4 Channel V1.0.3.0

DescriptionFeig UHF Reader 4 antennaInterfaceIP
  • Adjustment of references and pointer in the export

Peripheral HBM Scout 55 V1.0.6.0

DescriptionHBM Scout 55 measuring amplifierInterfaceSerial
  • Adjustment of references and pointer in the export

Peripheral Himmelwerk AED V2.0.4.0

DescriptionHimmelwerk AED (display unit digital) for spectral pyrometerInterfaceProfibus
  • Adjustment of references and pointer in the export

Peripheral Himmelwerk AED V2.0.7.0

DescriptionHimmelwerk AED (display unit digital) for spectral pyrometerInterfaceEtherCAT
  • Adjustment of references and pointer in the export

Peripheral Keyence SR 2000 V1.0.5.0

DescriptionScanner driver for Keyence SR750, SR1000 and SR2000 scannersInterfaceIP
  • Delete string before copy result from scanner

Peripheral Keyence Xg X2xxx V1.3.8.0

DescriptionMachine vision system for keyence XG-X 2xxx devicesInterfaceIP
  • Now check len of telegram before used MemCpy
  • Check used charackter befor send cmd CHANGE_NAME_IN_FILE_RULE
  • Size of buffer change to 4096 byte.
  • Bugfix with read error no. from device

Peripheral Kuka KRC4 V2.0.21.0

DescriptionKuka KRC4 Controller. Includes Kuka Option Package (KOP), requires KRC Version >=8.3 & <8.4, >=8.5 & <8.6, >8.6 & <=8.10InterfaceEtherCAT
  • Adjustment of references and pointer in the export

Peripheral Scanner (IP) V1.2.0.0

DescriptionUniversal scanner driver for TCP/IP scannersInterfaceIP
  • Parameter for select what scanner type is used
  • Rename company to Bosch Group
  • Rename Author to Nexeed Automation Team
  • Hostname and Port now not Variable Parameter in CPS
  • Now parameter Timeout in CPS is only visible if Scanner type is AUTOMATIC
  • Delete parameter conection timeout. Internal timeout from lib using.
  • Parameter EnableDigitalTrigger not longer export to PLC.
  • Parameter EnableDigitalTrigger is only visible if scanner type is AUTOMATIC

Peripheral Simulation Drive V1.2.9.0

DescriptionSimulation peripheral driveInterfaceOPC UA
  • Removed unused elements in HMI export that caused export errors

Peripheral Simulation N54 Safety V1.0.11.0

DescriptionSimulator of the digital IO safety circuit of Bosch norm N54 D6. It may not be used on real machinery or equipment, only for offline testing or training.InterfaceNone
  • Removed multiple use of UseAs property in OOD file

Peripheral Pepperl+Fuchs IQT1 V2.1.7.0

DescriptionPepperl+Fuchs RFID read/write head IQT1-18GM-IO-V1, IQT1-F61-IO-V1, IQT1-FP-IO-V1 with IO-Link/ Support of non-Beckhoff masters as of Cp Studio 5.7 (Expert Mode: 32 Byte In/32 Byte Out)InterfaceIoLink
  • Fixed probelm with UseAs, added UseAs for each FB (IODD/non IODD). Conditional linking removed.

Peripheral PulseRoller Linx-Ai (Interroll) V2.1.2.0

DescriptionPeripheral object for the MotionLinx-Ai two-zone high-speed control from PULSEROLLER in connection with Interroll unit objectInterfaceEtherCAT
  • Adjustment of references and pointer in the export
  • Added egnlish documentation

Peripheral Schmalz Kompaktejektor SCPSi V2.1.2.0

DescriptionPeripheral object for the Schmalz compact ejector SCPSi/ Support of non-Beckhoff masters as of Cp Studio 5.7 (4 Byte In/2 Byte Out)InterfaceIoLink
  • Fixed probelm with UseAs, added UseAs for each FB (IODD/non IODD). Conditional linking removed.

Peripheral Staeubli CS8C V1.3.22.0

DescriptionStäubli CS8C - robot controlInterfaceEtherCAT
  • Adjustment of references and pointer in the export

Peripheral TOX Pressotechnik ElectricDrive Core V2.0.1.0

DescriptionPeripheral object for the Tox-ElectricDrive Core systemInterfaceEtherCAT
  • Adjustment of references and pointer in the export
  • English documentation added

Peripheral Zebra Technologies Printer V1.2.6.0

DescriptionPeripheral driver for 'Zebra Printer' type devices connected over ethernet (TCP/IP)InterfaceIP
  • fixed endless lop if a replace variable was empty
 

 

New functions

Object Bosch Rexroth MC2 CXA V1.0.1.0

DescriptionSystem library for ctrlX
  • Extension of the type definition AXIS_REF

Object Ceta Ceta Leakage Base V2.4.1.0

DescriptionBase object for CETA x15 leakage measurement systems
  • Variable MeasUnit has now the property SelectEnumItems in the OSD file for OES/CpStudio

Object BasMove Base V2.1.8.0

DescriptionCommon content for all BasMove variants
  • Support ctrlX

Object BasMove Flexible V2.1.9.0

DescriptionBasic movement with each 16 freely configurable inputs and outputs, e.g. pneumatic valves/cylinders, motors with digital in-/outputs, etc.
  • Support ctrlX

Object BasMove Standard V2.1.9.0

DescriptionStandard basic movement with one input and one output per movement direction, e.g. pneumatic valves/cylinders, motors with digital in-/outputs, etc.
  • Support ctrlX

Object Control On V2.0.8.0

DescriptionAddon for control on according to Bosch ECAE standard (N54): automatic setting of PLC output =000+S-K911:A1 (bus runs and monitoring compressed air ok) by checking all bus masters with bus diagnostics. Additionally the addon handles the control on button input and output.
  • Support ctrlX

Object Data Tag Access Base V1.0.9.0

Descriptioninterface declaration for AtmoDataTagAccess unit
  • Support ctrlX

Object DataTagAccess V1.2.11.0

DescriptionUnit for accessing all peripheral devices that provide the interface IAtmoDataTagStream
  • Support ctrlX

Object Emergency Switch V2.0.10.0

DescriptionAddon for emergency switches
  • Support ctrlX

Object Input Wait V1.3.1.0

DescriptionWait for an input considering a debounce time.
  • Support ctrlX

Object Lamp Test V1.1.11.0

DescriptionThis addon provides a lamp test signal that triggers all objects/addons that support a lamp test signal.
  • Support ctrlX

Object Main Valve V2.0.7.0

DescriptionMaintenance unit with main valve (default device tag =100+M-K085A). Monitoring of compressed air according to Bosch/ATMO ECAE standard (N54). It requires digital inputs 'compressed air <0.3bar' and 'compressed air >4.5bar'. The valve itself must be switched by safety relais / safety controller.
  • Support ctrlX

Object Nok Part Counter V1.0.14.0

DescriptionSupports 'n times NOK in series' and 'x NOK parts of y'. Add-on that uses the original Nexeed Part Counter add-on and the NOK bit definitions in OES to automatically stop the operation mode and to show an error message on the HMI.
  • Support ctrlX

Object PdaMda Ddl V1.0.5.0

DescriptionEnables the standardized integration of the PDA/MDA telegrams (OpconXml)
  • Support ctrlX

Object Peripheral View Collector V1.0.1.0

DescriptionAdd-on for collecting views from Peripherals without a unit
  • Support ctrlX

Object Safety Base V2.0.11.0

DescriptionBase object for several safety objects according to Bosch/ATMO standard (see Bosch norm N54 D6 or ATMO EPLAN P8 basic diagram)
  • Support ctrlX

Object Safety Door Switch Base V1.1.3.0

DescriptionBase object of devices for safety door switches
  • Support ctrlX

Object Safety Door V2.0.15.0

DescriptionAddon for controlling and monitoring a safety door circuit with lockable safety doors and optionally with an enabling switch according to Bosch/ATMO ECAE standard (N54). Supports safety switches with digital IOs or bus interface (e.g. Schmersal SD-I-U-EC).
  • Support ctrlX

Object Safety Valve V2.0.10.0

DescriptionSafety valve according to Bosch/ATMO ECAE standard (N54); add-on works for both safety valve variants =100+M-K086A and =100+M-K087A; it additionally supports monitoring of valve systems with switching off monitoring (e.g. Aventics AES AV03/AV05)
  • Support ctrlX

Object Set Event V1.0.5.0

DescriptionAddon for automatic event set (Option 1: Monitoring digital input/output/flag and optional stop/cancel; Option 2: Set pre-defined event via 'ParImm.SetEvent')
  • Support ctrlX

Object State V1.1.6.0

DescriptionAccessible state tile displaying control on, fieldbus, safety doors, MES connection, home position, station empty. Additionally a state structure is provided in the PLC that collects many information at central location.
  • Support ctrlX

Object Station Lamp V2.2.1.0

DescriptionAddon for station lamp based on Bosch-Norm N54 B1
  • Subtree specific config parameters

Object Transfer Base V1.0.14.0

DescriptionTransfer base: common contents for transfer components
  • Support ctrlX

Object Transfer Master V1.3.11.0

DescriptionTransfer master
  • Support ctrlX

Object User Guidance V1.3.4.0

DescriptionText and step based user guidance in the visualization. This Add-on is used to guide the user through a series of steps. Using buttons the user can acknowledge when steps are completed.
  • Support ctrlX

Object Valve Diagnostics Base V1.0.3.0

DescriptionBase definitions for Valve Diagnostics (e.g. interface)
  • Support ctrlX

Object Wpc Separation V1.2.16.0

DescriptionUnit to control and monitor a stopper/separator for work piece carriers
  • Support ctrlX

Peripheral Bosch Rexroth PRC 7xxx V2.0.2.0

DescriptionRexroth resistance welding controller series PRC7xxxInterfaceEtherCAT
  • New device type added

Peripheral Festo CPX-FB37 V1.0.10.0

DescriptionFesto CPX-FB37 terminal bus nodeInterfaceEtherCAT
  • Festo CPX-FB37 IO module MPA2G with 4 digital outputs

Peripheral Furness Controls FCO75x V1.2.3.0

DescriptionPeripheral driver for Furness measure devices connected over ethernet (TCP/IP)InterfaceIP
  • State polling intervall added to ParCfg

Peripheral Jenny Science XENAX® Xvi75V8 / Xvi75V8s (NC) V2.0.11.0

DescriptionJenny EtherCAT drive controller XENAX® Xvi75V8 and Xvi75V8SInterfaceEtherCAT
  • Added link for native process status in NC

Peripheral Integrated Vision V1.1.10.0

DescriptionHDEE Vision system by Bosch ATMO with OPC UA connectionInterfaceOPC UA
  • Added all elements to OSD files that are OPC UA visible

Peripheral Simulation Scanner V1.0.9.0

DescriptionUniversal scanner driver for simulated scannersInterfaceOPC UA
  • New base version adden

Peripheral Schmersal SD-I-U-EC V2.0.9.0

DescriptionEtherCAT gateway for the series-wiring of the diagnostic signals of Schmersal safety switchgear with integrated SD interfaceInterfaceEtherCAT
  • Added ctrlX linking
 

 

HMI | Documentation | Translation

Object Ceta Ceta Leakage Test V2.4.3.0

DescriptionObject for CETATEST leakage testers. Supported test modes: pressure rise, pressure decay. Supported options: temperature compensation (only pressure decay), prefill/prevent
  • Changed text colour from black to default blue and use correct text group (missing text in HMI)
 

 

ECAE Macro

Macro Beckhoff EL1014_ES1014 V4.0.0.0

Description4 channel digital input terminal 24 V DC, 10µsInterfaceEtherCAT
  • Initial version

Macro Beckhoff NXA-CS-C6017-0010-W10-USB-TC-CP40-S V4.0.1.0

DescriptionBeckhoff PLC System NXA-CS-C6017-0010-W10-USB-TC-CP40-SInterfaceEtherCAT
  • Fix macro file name

Macro Beckhoff EK1310 V4.0.1.0

Description1-port EtherCAT P extension with feed-inInterfaceEtherCAT
  • fix link between Control plus Object and ECAE Macro in Objektbrowswer

Macro Beckhoff EL1004_ES1004 V4.0.0.0

Description4 channel digital input terminal 24 V DC, 3 msInterfaceEtherCAT
  • Initial version

Macro Beckhoff EL1088_ES1088 V4.0.0.0

Description8 channel digital input terminal 24 V DC, negative switchingInterfaceEtherCAT
  • Initial version

Macro Beckhoff EL1202_ES1202 V4.0.0.0

DescriptionDigital input terminalInterfaceEtherCAT
  • Initial version

Macro Beckhoff EL1862 V4.0.0.0

Description16-channel digital input terminals 24 V DC, type 3, flat-ribbon cable connectionInterfaceEtherCAT
  • Initial version

Macro Beckhoff C-CS-CX2020-EC-PLC-HMI V4.0.1.0

DescriptionBeckhoff PLC System C-CS-CX2020-EC-PLC-HMIInterfaceEtherCAT
  • Fix macro file name

Macro Beckhoff C-CS-C6015-EC-PLC-HMI V4.0.1.0

DescriptionBeckhoff PLC System C-CS-C6015-EC-PLC-HMIInterfaceEtherCAT
  • Fix macro file name

Macro Beckhoff EL4112_ES4112 V4.0.0.0

Description4 channel analog output terminal 0-20mA,16 bitInterfaceEtherCAT
  • Initial version

Macro Beckhoff EL7221-9014 V4.0.0.0

Description1 channel Servo terminalInterfaceEtherCAT
  • initial version

Macro Beckhoff NXA-CS-C6930-0060-W10-USB-TC-CP70-L V4.0.1.0

DescriptionBeckhoff PLC System NXA-CS-C6930-0060-W10-USB-TC-CP70-LInterfaceEtherCAT
  • Fix macro file name

Macro Beckhoff NXA-CS-C6930-0060-W10-TRM-TC-CP70-L V4.0.1.0

DescriptionBeckhoff PLC Sytem NXA-CS-C6930-0060-W10-TRM-TC-CP70-LInterfaceEtherCAT
  • Fix macro file name

Macro Beckhoff C-CS-C6015-EC-USB-PLC-HMI V4.0.1.0

DescriptionBeckhoff PLC System C-CS-C6015-EC-USB-PLC-HMIInterfaceEtherCAT
  • Fix macro file name

Macro Beckhoff EL1012_ES1012 V4.0.0.0

Description2 channel digital input terminal 24 V DC, 10 µsInterfaceEtherCAT
  • Initial version

Macro Bosch C-CS-G3-VPB40_4-SSD-EC-USB-PLC-HMI V4.0.1.0

DescriptionBosch C-CS-G3-VPB40.4-SSD-EC-USB-PLC-HMIInterfaceEtherCAT
  • Fix macro file name

Macro Beckhoff EL7221-0001 V4.0.0.0

Description1 channel Servo terminalInterfaceEtherCAT
  • initial version

Macro Beckhoff EL1114_ES1114 V4.0.0.0

Description4 channel digital input terminal 24 V DC, 10µsInterfaceEtherCAT
  • Initial version

Macro Beckhoff EPP4314-1002 V4.0.0.0

Description2 digital input, 2 channel analog input, 2 channel analog output terminal, configurable rangeInterfaceEtherCAT
  • Initial version

Macro Beckhoff EP4314-1002 V4.0.0.0

Description2 digital input, 2 channel analog input, 2 channel analog output terminal, configurable rangeInterfaceEtherCAT
  • Initial version

Macro Beckhoff EL1819 V4.0.0.0

Description16 channel digital input terminal 24 V DC, 10µsInterfaceEtherCAT
  • Initial version

Macro Beckhoff C-CS-CX2020-EC-USB-PLC-HMI V4.0.1.0

DescriptionBeckhoff PLC System C-CS-CX2020-EC-USB-PLC-HMIInterfaceEtherCAT
  • Fix macro file name

Macro Beckhoff EL1002_ES1002 V4.0.0.0

Description2 channel digital input terminal 24 V DC, 3 msInterfaceEtherCAT
  • Initial version

Macro Beckhoff NXA-CS-C6017-0010-W10-TRM-TC-CP40-S V4.0.1.0

DescriptionBeckhoff PLC System NXA-CS-C6017-0010-W10-TRM-TC-CP40-SInterfaceEtherCAT
  • Fix macro file name

Macro Beckhoff EL3112_ES3112 V4.0.0.0

Description2 channel analog input terminal, 0..20mA, differential, 16 bitInterfaceEtherCAT
  • Initial version

Macro Beckhoff EL1104_ES1104 V4.0.0.0

Description4 channel digital input terminal 24 V DC, 3 msInterfaceEtherCAT
  • Initial version

Macro Bosch C-CS-G3-VPB40_4-SSD-EC-PLC-HMI V4.0.1.0

DescriptionBosch C-CS-G3-VPB40.4-SSD-EC-PLC-HMI PLC SystemInterfaceEtherCAT
  • Fix macro file name

Macro Beckhoff EL1034_ES1034 V4.0.0.0

Description4 channel digital input terminal 24 V DC, potential freeInterfaceEtherCAT
  • Initial version

Macro Beckhoff EL1124_ES1124 V4.0.0.0

Description4 channel digital input terminal 5 V DCInterfaceEtherCAT
  • Initial version

Macro Bosch Rexroth ActiveMover V4.0.1.0

DescriptionLinear motor transfer system for short cycle applicationsInterfaceEtherCAT

 

Deutsch 🠦 English

 

Inhalt

 

 

Verbesserungen

Objekt Bosch Group CcsTest V2.2.9.0

BeschreibungBasisobjekt für CcsTester mit der Spezifikation 1.10.1
  • Anpassung der Referenzen und Pointer im Export

Objekt Bosch Group EhpUniversalCommInterface V1.1.16.0

BeschreibungObjekt für Universal Komm. Interface von EhP
  • Anpassung der Referenzen und Pointer im Export
NEXEED AUTOMATION OBJECT RELEASE