Problem with C-PS-easyPanel-EG-NG

Hello,

i have a problem with the easy panel.

I have 3 easy panels in my machine. I added them all to a mode forwarder. The first 2 easy panels are working fine but the 3rd is not responding.

When i check the software i see that the 3rd one has a "Dereference of invalid pointer" for the "REFERENCE TO OpconModeHandlerExtension"

Maybe anyone has some suggestions what i can do with this problem.

Thank you.

Best reply by SteffenR-

You must increase the OpconBase constant OPCON_EXTENSION_ADAPTERS_PER_EXT for maximum number of extension adapters in the library manager:

Some hints:

After changing library parameters, I recommend clean project and activate configuration.
Never delete libraries in TwinCAT, otherwise you will lose such library parameters.
Only delete unused libraries that are not managed by Control plus Studio / OES
(check this button:
).
With TwinCAT 4020.28 make sure that you are using all Bosch patches, otherwise library parameters can get lost.
If you do not have access to the Bosch-internal release server, contact our Helpdesk by email.

2 replies

Resolved